Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
You can gain access to all this absolutely free when you register for an account, so sign up today!
Hi, when i load the shaft it gets hooked up. However when it comes to pulling the trigger it does not fire. I tried to rotate the screw that is present under the trigger guard, but when I rotate it to one end there is no trigger movement (as if on safety), while if I rotate it to the other end there is trigger movement, but the gun still doesn't fire.........Pls explain a bit better the problem.....does the piston get hooked up? can you pull the trigger and the gun doesn't fire? the trigget got stuck?
I own cyrano Evo HF 100. Use couple times but now the trigger get stuck its look like safety never release...even the locking in normal position the gun still can't fire...anyone can help me to resolved this problems? Sorry I'm new in this forum.Hi all from Libya. Well about 3 months ago I bought a Mares Cyrano EVO HF 90 and was working like a dream. I had to go abroad for a few weeks and cleaned the gun really well and sprayed WD40 over the all important parts. I also left it fully pressurized, but unloaded. After I returned (3 weeks or so), I went for a dive, loaded the shaft and missed two good shots because the gun wouldn't fire. I figured there might be some kind of dirt, and eventually depressurised the gun completely, blew pressurised air into the trigger area just in case there was some dirt, and gave it a few shots of WD40, and pressurized it again. I didn't try it out as I was on land. Yesterday I went diving again and the gun would not shoot. I took a screwdriver with me and turned the sensitivity screw in various positions, but the gun, although pressurized and loaded, will not fire even when the screw is set to the position which allows the most trigger travel. I am stumped - what could it be - I don't trust any workshop here in Libya to do any repairs - and prefer to do it myself. Any ideas guys?
Thanks.