-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Pneumatic speargun without piston
- Thread startertromic
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
If I read this correctly then the spear has two retaining mechanisms, a spear tail plug is held by the trigger mechanism in the rear handle and there is another release between the shaft and the spear tail plug that seals at the muzzle when the weapon is discharged. The second release lets go when the spear tail plug telescopes/compresses on impact freeing up some jaws which hang onto the rear end of the shaft which will actually exit the gun. Reliability of this system in actual use?
Just reiterating the purpose of this thread is to create a pistonless gun design that does not have a shaft retention notch at the front end of the spear. The above design meets this criteria (or criterion to be exact).
Just reiterating the purpose of this thread is to create a pistonless gun design that does not have a shaft retention notch at the front end of the spear. The above design meets this criteria (or criterion to be exact).
Last edited: