I saw that, time for a paper geometry plot with the stock dimensions.......
Oh wait ! the nerds have a iphone app for that.
Cheers, Don
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 47,943+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 531,990+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,455+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Possible new gun
- Thread starter foxfish
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
I saw that, time for a paper geometry plot with the stock dimensions.......
Oh wait ! the nerds have a iphone app for that.
Cheers, Don
this company has a 3/8" diameter. ball bit 1/2" collet, tapering down to 1/4" for 40.00us$
http://magnate.net/index.cfm?event=showProductGroup&theID=460
http://magnate.net/index.cfm?event=showProductGroup&theID=460
Last edited:
The paper catalog may say it differently, but on their webpage, everything seems to be listed by the ball radius. So a 5/16" radius would be 5/8" diameter ball . . .
I can't find anything in a 5/16" diameter ball. Or am I looking at the wrong bits?
I can't find anything in a 5/16" diameter ball. Or am I looking at the wrong bits?
Last edited:
YOU ARE RIGHT! i just changed it to the correct info.
. i just noticed that they have it as the radius and not the diameter. they DO have one of the drawer pull plunge ball bits at 3/8" DIAMETER that would work for a 5/16" spear no? i should have looked harder at it sorry
Last edited:
Nope!
The carbon backbone with cedar gun will be fitted with the Benthos reverse mech.
This is the gun I will be building as a db feature - however because of the discussions & ideas on this thread I will be building a completely moulded CF gun in my own time that will be fitted with a custom Neptonics Tuna mech designed for a euro spear.
Once I get going I will start a new gun build thread.
Last edited:
I like to go with 1/32" clearance just because I hate to put a bunch of work into something and then have the shaft rattle around. But functionally, the 3/8" bit would work just as well.
I have moved the build to here http://forums.deeperblue.com/diy-homemade/85734-project-carbon-strongback-gun.html#post798518
